Setting A Stepping Stone Path

The stepping stone path I recently set in my backyard is the third path I have laid over the years.  I still have a bit more finessing of this space to do this summer, but I like how the path carved out a little seating area that faces the yard.  With a little time and elbow grease now, the set stones will require little maintenance over the years.

Here's a tutorial in case you are looking to set your own stepping stone path into existing grass.

Choose your material.  In my last house I set stepping stone paths with irregular stones that I bought at a stone yard.  I was able to pick through and choose what stones I wanted, and was careful to choose ones that were somewhat flat on one side,  and fairly large (yet small enough that I could lift them myself).  You can purchase natural stone by the pallet or by the pound at many stone yards.

For this project I repurposed rectangular-cut bluestones form our yard.  Our front path (that badly needs to be reset - but that's a project for another day) had a little side path off of it leading to a door in our garage.  We never used this path or the door, so I decided to repurpose the stones.
The bluestones are mostly smooth on one side, but quite unevenly textured on the other, so setting them is much like setting an naturally shaped stepping stone.
The uneven side wouldn't make a very good surface for stepping, so this side was placed down.  When laying the foundation for the stones I took into consideration that the bottom of the stone would would need to be leveled.

PS - Those pavers weigh a ton!  Holy upper body workout!!

The first step is to determine where the path will go and how far apart the stones will be set.  A hose is a great way to mark a curved path.  Set the stones about where you think they should be set and then walk on them several times, adjusting the stones based on where your natural step lands comfortably.   My steps ended up about 6" apart.

Use an old putty knife or other flat utensil to cut into the grass around each stone to create an outline, then move the stone to the side and use an edger to cut out the grass.  
{Side note:  I found that after cutting around the rectangle, I could then use the edger like a pizza "peel" and take out the whole rectangle of grass at once.  
I put these pieces aside and then later on filled in an area of the yard where the grass hadn't come in well.  Fingers crossed my "sod" takes over there!}

After removing the grass, prepare each hole for the stone by squaring the edges and digging out the dirt, allowing about 2" for sand along with the height of your stone.  
For these stones, which are about 2" high,  I dug down about 4 inches.

Place a layer of all-purpose sand, which is rough in nature.  I raked my fingers through the sand so the textured stone would sink into the loose sand.

With textured pavers or stones, take care to add more sand as needed to make each stone sit level with each other and just beneath the grass.  You want to embed these stones within the grass, not have them protruding out of the lawn.
Movement equals shifting which equals cracked stones later on, so make sure each stone is level and has no movement when weight bearing.  After pressing on each stone and adjusting with more sand, stand up and rock on the corners to feel if the stone is set and not moving.
From previous experience, if you take the time to set the stones properly they will look great for a long time to come!
Fill in any gaps with bits of the removed grass and dirt, packing it in tightly.  

Then step back and admire your work!
Still a long way to go…...
….but this wasn't too hard...

…..how about a fire pit next???


****Have you entered the Cutey Shamballa bracelet giveaway yet???  It ends tomorrow - hop on over and enter right now for a cute summer accessory!****

I'm sharing this project at these fine establishments with many thanks to the wonderful hostesses!

Tickled Pink at 504 Main


Cassie @ Primitive & Proper said...

looks awesome! i love stone!

pam {simple details} said...

WOW! What can't you do? It's fabulous (great tutorial, too) and you definitely need a fire pit to make it flow! :)

Maury Kilgo said...

That looks great! I love they way you did them. It makes them look like they've been there for years.

Jennifer L. Griffin said...

What a fantastic outdoor living space! It's coming along so nicely and the path is such a nice addition to set off your space. I'm impressed with your skills! So nice that you had such great stones to reuse in a different spot.

elizabeth@themustardceiling said...

Wow Lisa your new walkway looks awesome! I can't believe you did this yourself, it looks like a lot of hard, heavy work. Great job.

Sally said...

I love that you "framed" the seating area with this path. Looks great!

Urban Orchard Interiors said...

So helpful Lisa! What a great post. We are still trying to finish a brick path in our front yard and laying all those bricks evenly is quite a chore. Your path and seating area look so inviting!

Kim@Chattafabulous said...

Lisa, I love your stone path! I've tried it myself before but the rocks weren't flat enough and it was better to go around it! Thanks for showing me how to do it better!

Barbara said...

That looks great, you need a break after that good thing you have chairs!

Suzy www.savedbysuzy.blogspot.com said...

I love your path. It looks like it took a LOT of work and strength! My arms are sore just looking at the pictures.

Kelly @ View Along the Way said...

We need to do this! We're a long way off still, but I hope it turns out as pretty as yours. And the little sitting area you gained is so sweet!

Heaven's Walk said...

What a beautiful job! Thanks for sharing your tutorial today. I have plans for a path through a shade garden on the north side of our house this summer - and your tips will truly come in handy! :)

xoxo laurie

Julie said...

Gorgeous! I have a stone path as my front "sidewalk" & I love it. I'm sure you'll love yours too!

Sharon @ Elizabeth & Co. said...

Really pretty and I love the curve!

Jessica Gatto said...

I love your clipping path
. It looks like it took a LOT of work and strength! My arms are sore just looking at the pictures.